|Place of Origin:
|Minimum Order Quantity:
|10pcs/box,120pcs/ctn.Each mask under invididual polybag.
|L/C, D/A, D/P, T/T, Western Union, MoneyGram
|10,000 pcs/ per Day
|Foldable N95 Mask
|Non Woven Fabric
n95 rated mask,
n95 respirator mask
CE FFP2 Horizontal Foldable Mask , Fold Flat Mask , With Carbon With Valve
1 . Description
FFP2V Dust Mask with 4-ply non-woven/elasticated strap ,fold flat dust mask ,convenience take/packing: neutral color box, also can OEM/disposable dust mask with valve/protect against dust and liquid .Active carbon is better for odour and hot working condition.The respiratory protective devices are III category PPE, due to high risk of death in case of contamination of the respiratory tract. Indeed, the serious damages caused by the inhalation of harmful and toxic substances make the respiratory risk one of the highest risks to human health and safety.
Large surface area ensures very low breathing resistance
New large exhalation valve which reduces heat build-up and improves wearer comfort
Colour coded alphamesh shell for ease of identification
Adjustable headstrap allows for a secure and comfortable fit
Metal-free - suitable for food industry applications
Preformed nosebridge eliminates the need for regular adjustment
Compatible with a wide range of safety eyewear
Approved to R D allowing the mask to be worn for more than one shift
Conforms to EN 149: 2001 + A1: 2009 FFP2
The user should be trained in the fitting and should be aware of the instructions for using prior to donning the respirator.
Use in adequately ventilated areas,which are not deficiency of oxygen.
Do not use this respirator when oxygen concentration is less than 19.5%.
Do not use the mask in explosive environment.
The mask must be fitted correctly to ensure the level of protection expected is achieved.
The facila hairs or heards and certain facial charactrtistics may reduce the effectiveness of the mask.
For mask mark marked “NR”,the particle filtering half mask shall not be used for more than one shift.
4 . How to use?
Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
Hold respirator under chin,with nose piece up
Locate the upper strap across the crown of the head and the lower strap below the ears.
Strap must not be twisted
Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
The seal of the respirator on the face should be fit-checked before entering the workplace.
If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.
5. More pictures